Video Connection Warning

Expand / Collapse
 

Video Connection Warning


The physical modules within Spyder are connected by eight (8) hi-speed connections which pass video data from card to card. The video connection test checks each of these connectors individually, to ensure the video data is present and does not contain any errors. A video link problem can manifest itself in many ways, ranging from no visible symptoms on screen to noisy video or even complete loss of image.

Symptom

Poor connection via expansion cables, board SATA cables, or cable connected to Boards.

Troubleshooting 

Change the Expansion cables from your Spyders and reconfigure the config. These are really sensitive cables and can be hard to insert correctly so make sure they are fully in.

The issue might also be the sata cables in the spyder need to be disconnected and dusted off then reconnected, that sometimes works. 



Rate this Article:

Add Your Comments


Name: *
Email Address:
Web Address:
   
  
 
 
   
Verification Code:
*
 

Details
Last Modified:7/27/2016 11:44:57 AM

Last Modified By: EmmaK

Article not rated yet.

Article has been viewed 505 times.

Options